MT 2050i Universal Materials Testing Machine, 50kN, Computer Controlled

Floor-standing, Industrial grade, electro-mechanical, universal material tester, for a wide range of tests depending on the used accessories. Follows international standards. Rigid, elegant construction, main frame made of two fixing beams; one moving the other portal with two loading ball screws. Force is applied electromechanically using a servo motor with timing belt. Force is measured by a load cell, deformation/displacement is measured with electronic sensor (or electronic extesometer).  Fully controlled via computer software.

Measurement
Maximum test force : 50 kN
Accuracy class : 0.5
Indicating error : within ±5% of indicated value
Deformation range : 0.2% to 100% FS
Indicating error : 0.5% of indicated value
Displacement indicating error : ±0.5% of indicating value
Resolution : 0.025μm
Control parameters
Tuning range of force control rate : 0.005 to 5% FS/s
Tuning range of resolution rate : 0.005 to 5%FS/s
Tuning range of displacement rate : 0.001 to 200mm/min
Effective testing width : 400mm (or as required)
Effective distance for tensile : 700mm (or as required)


Contact Form
  1. (required)
  2. (required)
  3. (required)
  4. (required)
  5. (required)
  6. (required)
  7. (required)
  8. (required)
  9. (valid email required)
  10. (required)
  1. Captcha
 

cforms contact form by delicious:days